One beautiful guest room is a sample. Forty identical rooms delivered to the same standard, on a floor-by-floor programme that never closes more inventory than agreed, is a hospitality fit-out. AlcorOne treats the room as a product to be repeated and the public areas as the coordination challenge they actually are.
Vizag's tourism corridor along the beach road and the Rushikonda stretch means most hospitality work here happens either in a coastal exposure zone, on a live property, or both.
One room is built, reviewed and signed off before the rest are fabricated. Every dimension, finish, socket position and hardware choice is locked there. Discovering a problem in room one costs a week; discovering it in room thirty costs the programme.
Work is released in blocks so the number of rooms out of inventory at any time is a decision you make, not a consequence of our sequencing. Hoarding, separate access and noise windows are planned per block.
Lobby, reception, corridors and F&B areas involve joinery, stone, glass, lighting and signage interacting in the same volume. These are sequenced against one programme rather than each trade arriving when it is free.
Guest-room joinery takes abuse no home ever does — suitcases against skirting, wet towels on vanities, daily cleaning chemicals. Edges are machine-banded and sealed, substrates are moisture-resistant, and high-contact surfaces are chosen to be repairable in place.
Sea-facing rooms and outdoor-adjacent areas carry marine-grade substrate and stainless hardware. On this coast a plated fitting in a sea-facing bathroom shows rust-bleed inside a year, and replacing it means taking the room out of service.
Noise windows, service-lift access, debris routes and worker circulation are agreed with your operations team before mobilising. A fit-out that generates guest complaints has failed regardless of the finish quality.
Hospitality scopes vary enormously. These four inputs decide the programme and the cost more than anything else.
How many rooms, in how many configurations. Two key types across forty rooms is a repeatable programme; eight key types across forty is largely bespoke work priced as such.
A vacant property can be worked continuously. A trading hotel means restricted hours, guest-facing hoarding, and a phasing plan — typically 20 to 40% longer for the same scope.
How many rooms you can afford out of service at once. This single number determines block size, and therefore the total programme duration.
Sea-facing and outdoor-adjacent areas carry a heavier specification. We survey the property rather than apply one grade uniformly, so the premium goes where the salt actually reaches.
Standards, regulatory registries, and manufacturer references that back the material grades, pricing framework, and compliance points in this guide:
Yes, on a floor-by-floor or block-by-block basis with hoarding, separate worker access and agreed noise windows. Expect roughly 20 to 40% longer than the same scope in a vacant property, because working hours are restricted and set-up and clean-down happen every day rather than once. We agree the maximum rooms out of inventory with you before mobilising, since that number, not our labour capacity, sets the programme length.
Because a guest-room fit-out is a repeated product, and every error repeats with it. The prototype locks dimensions, finishes, socket and switch positions, hardware, and the housekeeping details that only surface when someone tries to clean the room. A problem found in room one costs a week. The same problem found in room thirty costs the programme and the budget.
For abuse and for cleaning, not for appearance. Suitcase impact on skirtings and bed bases, wet towels on vanity tops, and daily chemical cleaning are loads no home imposes. That means moisture-resistant substrates, fully sealed machine-banded edges with no open joints, and surfaces selected so a damaged panel can be repaired in place rather than requiring the room to be stripped.
Yes, and it should be surveyed rather than assumed. Sea-facing rooms, balconies and outdoor-adjacent public areas need marine-grade substrate and stainless hardware; inland-facing rooms in the same building often do not. Applying the heaviest specification uniformly wastes money, and applying the lightest uniformly means rust-bleed in the sea-facing bathrooms within a year — and a room out of service to fix it.
Yes. We execute to a designer's intent or an operator's brand standard, producing the shop drawings, material submittals and prototype for approval against it. Where a brand standard conflicts with coastal durability — a specified plated fitting in a sea-facing bathroom, for instance — we raise it in writing with an alternative rather than build a known failure.
There is no useful published rate, because cost per key swings with key count, number of key types, whether the property is live, and how much public-area and F&B scope is included. We price from a BOQ after surveying the property, with guest rooms costed per key type and public areas costed separately, so you can see the repeatable component distinctly from the bespoke one.
Send the key schedule, floor plans, and whether the property will be trading during the works. We will come back with a phasing plan, a prototype-first programme, and a BOQ that separates per-key cost from public-area scope.