Jewellery, automotive, furniture, tiles, apparel — the job is to make the product read correctly from the pavement and again at arm's length. That is a lighting and sightline problem first, and a joinery problem second.
For transparency: we have not delivered a large-format showroom, in Bengaluru or elsewhere. Our nearest completed work is display joinery and integrated lighting on a Chennai cafe, and office panelling and reception detailing on two Chennai offices. Weigh that against your scope.
Colour temperature, colour rendering index and beam angle specified against the product category. Jewellery, fabric and painted metal each need different treatment, and a showroom lit at the wrong CRI makes good product look wrong at the moment of decision.
The storefront does the first selling. Glazing, framing, signage integration and entrance detailing coordinated as one element rather than three separate packages.
What a passer-by sees through the glazing at four metres decides whether they come in. Display heights, hero positions and the depth of the first zone are set from the pavement, not from a plan view.
Product is picked up, put down and rearranged constantly. Display units get sealed edges, repairable surfaces, and reconfigurability so a merchandising change is not a construction project.
Stock, packing, staff and service areas planned properly rather than left as residual space. A showroom whose stockroom does not work spills its disorder onto the sales floor within a month.
For franchise and single-brand showrooms we execute to the brand manual with submittals and mock-ups for approval, and flag in writing where a specified item will not perform in the position it is called for.
Door closers, floor springs and handles take the highest cycle count in the building. Correctly rated hardware costs less than the callouts a cheap specification generates in the first year.
External lighting and illuminated signage need sealed enclosures and drainage. During the June–September monsoon, water ingress into a sign is both a failure and an electrical risk.
Frame selection and fixing detail are set for the actual opening and exposure. Bengaluru spares you coastal corrosion, so the governing factors here are load, movement and water shedding.
Standards, regulatory registries, and manufacturer references that back the material grades, pricing framework, and compliance points in this guide:
No, and we have not delivered a large-format showroom in any city. The closest completed work is display counters and integrated lighting on a Chennai cafe, plus reception and panelling detailing on two Chennai offices. Our only delivered Bengaluru project is a villa interior. If a delivered showroom is a hard requirement, we would rather you knew before shortlisting us.
Six to twelve weeks for a typical large-format showroom in a shell unit. Facade and glazing lead times, plus brand-standard approvals where a franchise manual applies, are usually the critical path rather than the joinery. Custom glazing and imported signage should be ordered before internal work begins.
Because it is what actually sells the product and the hardest thing to correct later. Colour temperature, colour rendering index and beam angle need specifying against the product category — jewellery needs high-CRI accent lighting at tight beam angles, apparel needs even neutral fill, polished surfaces need reflection control. Retrofitting the right fitting into finished joinery means opening it up again.
Yes. We produce shop drawings, material submittals and mock-ups for brand approval and build to the manual. Where the manual specifies something that will not perform in the position called for, we raise it in writing with a compliant alternative rather than install a known failure and hand over the consequence.
Often yes, in zones, with hoarding and out-of-hours work for anything noisy or dusty. Facade and entrance work is the exception and usually needs a short closure or a temporary entrance. We would rather plan that with you upfront than promise continuous trading and request a shutdown halfway through.
Too scope-dependent to publish. A tiles or furniture showroom needing simple display and good general lighting is a different order of cost from a jewellery showroom needing high-CRI accent lighting, security detailing and premium finishes. We price from an itemised BOQ after survey, separating facade, lighting, display joinery and back-of-house.
Share the shell drawings, tell us what will be on display, and include any brand manual that applies. We will come back with a lighting approach, a facade specification, and an itemised BOQ.